CURE FOR SMELLY WATER PROBLEMS:
Prevent Smelly Water Problems
Shop and Buy Wholesale Direct! The Best Aluminum Zinc Anode Rod or Power Anode Rod
Most Popular Items:
Aluminum Zinc Anode Rod – .800 x 3/4 x 44″ hex head anode, Model# AR136
Aluminum Zinc Anode Rod – .800 x 3/4 x 44″ hex head flexible anode, Model# AR139
Aluminum Zinc Anode Rod – .800″ x 3/4″ x 3″ nipple x 48″ outlet anode, Model# AR142
Aluminum Zinc Anode Rod – .800 x 3/4 x 3″ nipple x 48″ outlet flexible anode, Model# AR145
Power Anode Rod with transformer and 6′ lead, Model# AR148
Power Anode Rod with transformer and 6′ lead, Model# AR149
Power Anode Rod with transformer and 6′ lead. Model# AR150
Remove existing anode rod or rods. Drain out 2 quarts of water from water heater. Add 2 pints of 3% hydrogen peroxide (available at drug stores) through anode rod hole. Install an aluminum zinc rod, or Power Anode. Do not plugin power anode until tank is pressurized.
Pressurize water heater and let stand 20-30 minutes. Purge all of the hot taps individually until warm water comes out of the tap. Finally flush heater under pressure through drain valve for 5 minutes. To achieve superior results install a curved dip tube and full port ball valve for a turbo flush. (refer to TankSaver Kit installation manual for instructions). YOU’LL LOVE THE RESULTS.
Standard 3/4” x 44″ hex plug feed-through replaces the existing hex head sacrificial anode or with a tee, The sacrificial hot outlet anode can be replaced with a power anode.
The impressed current anode system has a life many times that of sacrificial anodes even in highly corrosive water.
The Power Anode is a 100% cure for that rotten egg smell. For more info visit our Anode Information page.
Where long term economics are a concern, commercial water heaters, use of a softener or areas where well water can produce excessive sulfides (that rotten egg smell), power anodes may be the best choice Includes transformer with 6’ lead.